How do you get the most out of listening to your favorite music in your car? The answer is simple: a careful choice of audio system components depending on genre preferences and installation conditions, and competent installation of the system. Today I will reveal to you the secrets of proper selection and installation of different types of audio systems – car radios, amplifiers, subwoofers, etc. What’s more, only the best car speakers for your Jeep can be found here on https://tonybassogm.com/accessories/sound/speakers-for-jeep-wrangler-sound-bar/. This article presents the best and highest quality speaker options for your car. You can also read all the pros and cons of the models and choose the most suitable one for you.
How to Choose A Car Speaker System
Power Rating
When choosing a speaker system, pay attention not to the maximum wattage (it only shows how many watts the speakers can handle), but to the power rating, at which the level of distortion does not exceed a given threshold. For listening to music in a car at medium volume 10-15 watts per channel is usually sufficient. It is important to keep in mind that while in the case of a stereo or amplifier installation, it is the power of the device itself that matters for the speaker, the power supplied to its winding. By the way, if you do want to swap amps, I suggest you learn what to keep in mind when buying used amps. To do that you just have to go to the forum and here you will find a lot of information useful for you and make the right choice based on it.
Kinds Of Speakers
Distinguish between coaxial and component speakers. Coaxial systems are characterized by the fact that two (tweeter and midrange) or even three (to reproduce the entire spectrum of frequencies) speakers are mounted in one case, which makes it much easier to install them, but it is problematic to correctly orient the speakers. In terms of sound quality, they are usually inferior to component speakers. Standard component speakers, designed for spaced-out installation in the car, include two midrange speakers, two tweeters, and two passive crossovers.
The Labels
Do not trust the labels on the packaging of speakers of dubious origin – remember that one pair of speakers is not able to reproduce qualitatively the entire frequency range of the sound perceived by the human ear (from 20 Hz to 20 kHz). This requires at least a three-way system including:
1) high-frequency speakers (tweeters) that reproduce the frequency range from 4 to 20 kHz,
2) midrange speakers (500 Hz to 5 kHz),
(3) mid-bass (80 to 1kHz)
4) woofers (from 30 Hz to 100 Hz) – subwoofers.
The Installation
Determine if the installation of sound system will be connected to making a podium (i.e. base of the speaker, a place for its mounting) or a radical revamping of the door trim or if the installation will be done in the standard place. As a rule, the installation of the front speaker system is carried out in the regular place, with its further modification. For the coordinated work of the front speakers and subwoofer, it is best to try to install the acoustics not less than 16 centimeters in size and, having finalized the regular place, install the speaker with a suitable planting depth. Among the most significant nuances when installing speakers are the following: the orientation of the speaker to the listener, the removal of obstacles in front of the speaker, a relatively large weight of the podium. All of these things combine to produce a better response and a more balanced and even tonal balance.
The Noise Insulation
Take care of the noise insulation! To get the best comfort in the car while driving and listening to music, it is necessary to insulate the interior of the car and the interior trim. In some cases, partial noise isolation is applied, for example, to the doors, the volume of which is intended for the acoustic design of the speaker.
The Quality
Remember the signs that allow you to determine the quality of the speaker system without listening to it! For example, a molded midbass basket is better than a stamped one and having more rigidity, allows reducing the coefficient of non-linear distortion. The material of the driver cone or tweeter dome also has its own sound characteristics – a silk tweeter, for example, has a very soft, airy high-frequency response, while a titanium dome tweeter has a much sharper, crisper high-frequency response.
Your Subwoofer
Choose and install the right subwoofer! A low-powered, but properly sized and manufactured subwoofer will outperform a speaker designed for SPL competitions. Choose a subwoofer speaker based on your preferred musical genres – consult a specialist!
Subwoofers can be passive (cabinet or separate) and active. Passive ones need an additional amplifier with a crossover, as no car has the necessary power to operate the subwoofer. Active subwoofers come complete with an amplifier and closed-circuit housing. They are easier to connect and install, but don’t always allow you to fine-tune the subwoofer’s performance to the rest of your system.
Final Steps
Selection and installation of car audio system with good sound implies obligatory participation of professionals who perfectly know the model range of electronic components from different manufacturers, who are able to select audio system components to get the desired sound, who have experience with different car brands, experience in car repairs and joinery, knowledge of electricity, and design abilities to create the necessary acoustic design, comply with technological requirements and organically fit the sound. And finally, the ability to listen and tune the audio system, achieving the best possible sound from the used components.
As a result, the sequence of your actions when selecting speakers should be as follows. First, decide on the type of system and the way of its installation. According to the manual of the radio, and in accordance with its technical characteristics, select the speakers. It is necessary to pay attention to the correspondence of the dimensions of the speakers to the regular places designed for their installation in the car. The choice will be easier if your radio is combined with a navigator.
That’s It!
As a result, even if you bought a car with a sound system in the basic package, it does not guarantee its quality sound. The reasons may vary, but boil down to one thing: you need to install a sound processor or a more powerful amplifier. Or maybe you want to buy better speakers. That’s why I hope that this article was useful for you!